Fixpro technicians working on an underground fuel tank access chamber
Indigenous technical services · Est. 2018 · RC 1543951

Your tanks and pipelines, handled properly.

Cleaning, calibration, leak detection, pipeline and pump installation for fuel storage assets across Nigeria — delivered by one licensed contractor, under one HSE regime, with one point of accountability.

Discipline
Tank & pipeline lifecycle
Coverage
Nationwide — Lagos to Sokoto
Operating since
2018
Status
CAC registered & licensed
Trusted by
MTN CCECC Amaiden Energy Vision
What we do

Fourteen capabilities. One contractor.

Most operators split this work across a cleaning vendor, a calibration outfit, a pump engineer and a welder. We cover the whole installation in-house — tanks, pipework, pumps, monitoring, civils and the licensing paperwork — which means no coordination gaps, no finger-pointing between contractors, and one team that already knows your site.

Technician in breathing apparatus preparing for confined space tank entry

Tank cleaning & sludge removal

Degassing, confined-space entry, manual and mechanical sludge extraction, and compliant disposal of hazardous residue from underground and above-ground storage tanks.

SCBA · Gas testing · Permit-controlled entry
Technician calibrating a positive displacement flowmeter

Tank & meter calibration

Calibration of underground and surface tanks, vertical tanks, mobile trucks and oil vessels — plus flowmeter calibration, with certified dip charts issued on completion.

Strapping · Dip charts · Flowmeter verification
Instrumented pressure and leak detection test running on a bulk storage tank

Pressure testing & leak detection

Instrumented integrity testing on tanks and pipework, with logged pressure-decay data and a written result you can put in front of a regulator or an insurer.

Instrumented · Logged · Documented
Two Fixpro technicians measuring and cutting pipe during fabrication

Pipeline installation

Underground and surface fuel pipeline runs, multi-tank manifold networks, trench construction and pipework amendment for filling stations and industrial installations.

Fabrication · Trenching · Manifolds
Technician installing an electric fuel transfer pump

Transfer pump installation

Supply, installation and replacement of electric transfer pumps moving fuel from bulk storage to generator day tanks, sized to the duty and commissioned on site.

Sizing · Installation · Commissioning
Technicians replacing a valve inside a tank access chamber

Fabrication & fittings

Tank fabrication, valve and fusible-link replacement, fill-point work and the unglamorous repairs that keep an installation compliant and running.

Tanks · Valves · Fusible links
Full scope

Everything we're set up to do

The six above are what we're called for most often. The full list is wider — if your installation needs it, ask.

  • Tank cleaning & sludge removalUnderground and above-ground, degassed and permit-controlled
  • Tank farm cleaning & waste disposalMulti-tank facilities, with manifested disposal of residue
  • Tank & meter calibrationTanks, vessels, mobile trucks and flowmeters, dip charts issued
  • Pressure testing & leak detectionInstrumented, logged and issued as a written result
  • Fuel tank fabricationBuilt to specification for underground or surface installation
  • Pipeline installationUnderground and surface runs, manifolds, trenching, amendments
  • Transfer pump installationSized to duty, installed and commissioned on site
  • Fuel dispense pump installation & repairInstallation plus routine maintenance and breakdown repair
  • Pump routine maintenance & repairsScheduled servicing to keep transfer running and avoid failures
  • Diesel monitoring systemsLevel and consumption monitoring so shortfalls are visible early
  • Manhole installationAccess chambers built and fitted for safe tank entry and servicing
  • Bundwall construction & fabricationConcrete construction or steel fabrication for spill containment
  • Valve & fusible link replacementFire safety valves, isolation valves and fill-point fittings
  • Fuel storage licence servicesSupport in getting a storage installation properly licensed
Tank refurbishment

Corrosion doesn't wait for your maintenance budget.

Surface rust on a bulk tank is not cosmetic — it's the beginning of wall loss, and wall loss ends in a leak, a shutdown and a regulator asking questions. We strip, treat and recoat storage tanks in place, without decommissioning the installation.

Drag the handle to compare the same tank before and after treatment.

Book an inspection
Storage tank showing surface corrosion before refurbishment The same storage tank after surface preparation and recoating
Before After
HSE & compliance

The part of the job that has no shortcuts.

Every scope we take on involves flammable product, confined spaces, or both. A contractor who treats that casually is a liability on your site and on your licence. Our crews work to a permit system, in full PPE, with atmosphere testing before anyone goes in.

  • Permit-to-work disciplineNo entry, hot work or breaking of containment without an issued permit and a signed-off risk assessment.
  • Confined space entrySelf-contained breathing apparatus, harness and retrieval line, standby attendant and continuous atmosphere monitoring.
  • Gas testing before entryTanks degassed and tested to a safe reading before any technician breaks the seal.
  • Responsible waste handlingSludge and contaminated residue drummed, manifested and disposed through approved channels — not tipped on site.
  • Full PPE, no exceptionsCoveralls, hard hats, boots and eye protection on every crew, on every job, regardless of duration.
Fixpro technician fully equipped in breathing apparatus, harness and hard hat before confined space entry
Selected work

Recent jobs.

A sample of scopes completed for corporate, telecoms-infrastructure and industrial clients with on-site fuel storage. We mobilise nationwide — from Lagos and Port Harcourt to Abuja and as far north as Sokoto.

Technicians installing transfer pumps and associated pipework beside bulk tanks
Abuja2024

Transfer pump installation

Installed and commissioned electric transfer pumps with associated pipework and isolation valves serving bulk diesel storage at a multi-site corporate facility.

Instrumented leak test in progress on an underground fuel tank
VGC, LagosLeak test

Underground tank integrity test

Instrumented pressure-decay leak detection on an underground diesel tank, with logged data and a written integrity result issued to the facility team.

Newly installed fusible link valve assembly on fuel pipework
Port Harcourt2025

Fusible link installation

Fitted fusible-link fire safety valves to fuel supply lines at an industrial site, bringing the installation in line with fire-protection requirements.

Crew replacing transfer pumps beside vertical storage tanks
Abuja2024

Transfer pump replacement

Removed failed transfer pumps and installed replacements with reworked suction and delivery pipework, restoring fuel transfer to generator day tanks.

Technician gauging an underground diesel tank during servicing
LagosServicing

Underground diesel tank servicing

Drained, cleaned and gauged an underground diesel tank, removing accumulated water and sludge from the tank bottom before returning it to service.

Tank sludge being decanted into drums for controlled disposal
NationwideOngoing

Sludge extraction & disposal

Extraction of heavy hydrocarbon sludge from storage tank bottoms, drummed on site and routed to approved disposal rather than discharged locally.

In their words

What clients say.

“Fixpro handled our tank cleaning with a level of care we hadn't seen from previous contractors. The site was left clean and the documentation was complete.”

[Client name to confirm]Facility Manager · Lagos

“Turnaround was faster than quoted and they worked around our operating hours so we never lost fuel availability on site.”

[Client name to confirm]Operations Lead · Abuja

“Their crew arrived properly equipped and followed our permit process without being chased. That matters more to us than price.”

[Client name to confirm]HSE Officer · Port Harcourt
Get in touch

Tell us what you're working with.

Send us the basics — tank type, capacity, location and what you need done. We'll come back with a scope and a price, or arrange a site visit if the job needs eyes on it first.

Phone
0806 081 3501
0813 964 6669
0803 623 7475
WhatsApp
0806 081 3501
Email
info@fixprong.com
Office
2A Ofada Street, Mushin, Lagos
Registration
RC 1543951 — Corporate Affairs Commission
Call now WhatsApp